How to bake Weigu V70: analysis of hot topics and hot content on the Internet
Recently, discussions about car film technology have continued to heat up on major social platforms and car forums, especially the construction skills of the high-end insulation film of V70, which has become the focus. This article will combine the hot topics on the Internet in the past 10 days to provide you with a detailed analysis of the film baking method of V70, and attach structured data for reference.
1. Hot topic data on the entire network in the past 10 days
| platform | hot topics | Discussion popularity |
|---|---|---|
| #Automotive film pit avoidance guide# | 123,000 reads | |
| Douyin | Weigu V70 construction actual measurement | 85,000 likes |
| Zhihu | How to judge whether the insulation film is genuine or fake? | 12,000 discussions |
| car home | Weigu V70 vs Lonmo Changyue 80 | 6500 replies |
2. Detailed explanation of the steps of V70 film baking
1.Preparation: Clean the glass surface to ensure there is no dust or oil stains; leave 3-5cm margin on the edge when cutting the V70 film.
2.Initial finalization: Use a hot air gun (temperature set at 120-150°C) to heat the film in a spiral shape from the center to the outside, and use a scraper to gently remove air bubbles.
3.edge processing: Use the "segmented heating method" for the parts with larger curvature of the car window, pausing for 2 seconds every 5 seconds to avoid local overheating.
4.Closing inspection: After the baking film is completed, use a utility knife to accurately cut along the edge of the glass, and check again to see if there are any remaining bubbles or wrinkles.
| Tool list | Things to note |
|---|---|
| heat gun | Keep a distance of more than 10cm to avoid burning the membrane surface |
| Hard scraper | Wrap with non-woven fabric when using to prevent scratches |
| watering can | Spray neutral film liquid to assist construction |
3. Frequently Asked Questions (based on recent discussions)
Q1: Why does V70 easily wrinkle when baking film?
A1: Most of them are caused by uneven heating. It is recommended to use the "low temperature, slow speed" baking method and operate in different areas.
Q2: How to remedy the warping of the edges after baking?
A2: You can partially re-bake and apply pressure. If it doesn't work, you need to re-cut the part of the film.
4. Industry Trends and User Feedback
According to the data of the past 10 days, the construction difficulty and effect comparison of Weigu V70 has become the core controversial point. Users generally believe that its high thermal insulation performance (UV blocking rate of 99%) is worth recommending, but the construction technology requirements are high, so it is recommended to choose a professional store for operation.
| Performance indicators | Weigu V70 | industry average |
|---|---|---|
| Infrared blocking rate | 94% | 85% |
| Visible light transmittance | 70% | 75% |
| Warranty period | 10 years | 5-8 years |
Conclusion
Mastering the film baking skills of V70 requires a combination of theoretical knowledge and practical experience. It is recommended that car owners watch recent popular instructional videos (such as Douyin's "Lao Zhou Film" series) before construction, and give priority to official certified service providers to ensure the best results.
check the details
check the details
en
